Brezza Tyre Size: Factory Size by Variant
Brezza tyre size is 215/60 R16 on the current Maruti Brezza across all variants. The older Vitara Brezza used 205/60 R16 on base trims and 215/60 R16 on top trims. All are tubeless, and normal pressure is about 33 PSI.
On this page

Brezza tyre size is 215/60 R16 on the current Maruti Brezza, and the same size fits every variant. The older Vitara Brezza (2016 to 2022) split its range: base trims used 205/60 R16 and top trims used 215/60 R16. All of them run tubeless tyres on 16-inch wheels.
That one-size rule makes shopping simple, but the old split still trips people up. In practice, a used Vitara Brezza may carry either size, and mixing them on one axle is a mistake. In practice, this guide lists the Brezza tyre size by generation and variant, explains the numbers, and shows which alternative sizes keep the speedometer honest. It also covers pressure and the price range you can expect.
Key takeaways
- Current Brezza (all variants): 215/60 R16, tubeless, on 16-inch wheels.
- Older Vitara Brezza LDi, LXi, VDi, VXi: 205/60 R16.
- Older Vitara Brezza ZDi, ZXi and above: 215/60 R16.
- Normal pressure is about 33 PSI, but read the door placard on your car.
- The two sizes differ by roughly 1.8% in diameter, so never mix them on one axle.
Brezza tyre size by variant
Car portals report that the current Brezza uses a single tyre size across all of its petrol, turbo and CNG variants. Also, the difference between trims is the wheel. Lower trims wear 16-inch steel wheels with covers, and higher trims wear 16-inch alloys.
| Variant group | Tyre size (front and rear) | Wheel | Tyre type |
|---|---|---|---|
| Current Brezza LXi (petrol, CNG) | 215/60 R16 | 16-inch steel with covers | Tubeless |
| Current Brezza VXi | 215/60 R16 | 16-inch | Tubeless |
| Current Brezza ZXi | 215/60 R16 | 16-inch | Tubeless |
| Current Brezza ZXi+ | 215/60 R16 | 16-inch alloy | Tubeless |
Maruti does not publish the exact wheel for every mid trim, so confirm yours by looking. In any case, the tyre size stays the same.
Older Vitara Brezza tyre size (2016 to 2022)
The first-generation car followed a two-size rule that many owners still remember.
| Variant group | Tyre size | Wheel |
|---|---|---|
| LDi, LXi, VDi, VXi | 205/60 R16 | Steel |
| ZDi, ZXi, ZDi+, ZXi+ | 215/60 R16 | Alloy |
If you buy a used Vitara Brezza, read the sidewall instead of trusting the variant name. Previous owners often swap wheels, and a mismatched set can throw off the speedometer and handling.
What 215/60 R16 means
Each part of the code tells you something. Our tyre size decoder reads any sidewall, and here is the Brezza breakdown.
- 215: section width in millimetres.
- 60: sidewall height as a percentage of the width, which gives 129 mm.
- R16: radial construction on a 16-inch rim.
Adding it up, the 215/60 R16 tyre has an overall diameter of about 664 mm. The 205/60 R16 tyre measures about 652 mm. That 12 mm gap is roughly 1.8%. As a result, a car on 215s travels about 1.8% farther per wheel turn than one on 205s, and the speedometer reads slightly differently. Therefore, always fit a matched set.
Safe alternatives to the Brezza tyre size
Some owners want a wider or taller tyre. Use the 3% rule: keep the overall diameter within 3% of the original so the speedometer error stays small. Even so, you can test any size in the tyre size calculator.
| Option | Overall diameter | Change from 215/60 R16 | Verdict |
|---|---|---|---|
| 215/60 R16 (stock) | 664 mm | 0% | Factory size |
| 205/65 R16 | 673 mm | +1.3% | Within the 3% rule |
| 225/55 R16 | 654 mm | -1.6% | Within the 3% rule, check clearance |
| 215/65 R16 | 686 mm | +3.2% | Over the limit |
Even a size that passes the 3% test needs a clearance check. Also, a wider tyre can touch the arch liner on full lock. Furthermore, the load index must match or beat the stock tyre, so compare it with the load index chart before you buy.
Brezza tyre pressure
Published figures put the Brezza at about 33 PSI for normal driving. In addition, some older Vitara Brezza listings show 36 PSI at both ends. The two numbers differ, so use the placard on the driver’s door pillar, which lists the maker’s figure for your variant and load. Check cold, and add the extra pressure only when the placard allows it for a full load. For unit conversions, use the PSI to bar converter.
How much do Brezza tyres cost?
Prices depend on the brand and the pattern. Listing sites show starting prices of about Rs 2,177 for 205/60 R16 and Rs 2,534 for 215/60 R16. Approximate market prices run higher, around Rs 3,400-3,600 per tyre for common patterns, and premium brands cost far more, with one listing showing a top price of Rs 12,745. Still, treat all of these as guides, and ask for a written quote that includes fitting and balancing.
When to replace Brezza tyres
Replace a tyre when the tread reaches the wear bars, or when you see cracks, bulges or repeated pressure loss. Age matters as well. Use the tyre age checker to read the date code, because old rubber hardens even when the tread looks good. Even so, replace tyres in pairs on the same axle, or as a set of four if the wear is uneven.
Related guides
See the same exercise for a hatchback in our Baleno tyre size guide. Explore more fitment guides in the tyre size category, or start at the DailyPress homepage.
Rim, wheel and fitment notes for the Brezza
The tyre is only half of the fitment. Wheel width, offset and bolt pattern decide whether a new size sits correctly on the hub. Moreover, the Brezza’s 16-inch wheels are wide enough for both 205 and 215 sections, which is why Maruti could use both sizes across the older range.
| Point | What to check |
|---|---|
| Wheel size | 16 inches on current and older cars |
| Tyre type | Tubeless radial, so no tube is needed |
| Spare | Confirm the spare matches your running size |
| Load index | Match or beat the stock tyre’s rating |
| Date code | Four digits on the sidewall, week then year |
Therefore, if you change wheels, ask the fitter to confirm the offset and the bolt pattern. That said, a wrong offset can rub the suspension or the arch even when the tyre size is correct. After fitting, balance all four wheels and get the alignment checked once.
FAQs
What is the Brezza tyre size?
The current Maruti Brezza uses 215/60 R16 tubeless tyres on every variant. The older Vitara Brezza used 205/60 R16 on base trims and 215/60 R16 on top trims.
Is Brezza tyre size the same for petrol, turbo and CNG?
Yes. Portals report one tyre size across all current variants. Only the wheel type changes, with steel on lower trims and alloy on higher ones.
Can I fit 205/60 R16 on a current Brezza?
It is a smaller diameter, about 1.8% less, so the speedometer will read slightly high. Likewise, fit a matched set of four, and check the load index against the original.
What is the Brezza tyre pressure?
Normal pressure is about 33 PSI, and some older listings show 36 PSI. In addition, use the door placard on your car for the exact figure.
Is the Brezza tyre tubeless?
Yes. All variants and both generations run tubeless radial tyres, so you can plug a small tread puncture on the roadside.
How much do Brezza tyres cost?
Listings start around Rs 2,200-2,500 per tyre. Common patterns cost roughly Rs 3,400-3,600, and premium brands cost more.
Check your Brezza tyre size on the sidewall before you buy
For the current car, the answer is 215/60 R16 on every variant. For an older Vitara Brezza, check whether it is the 205 or the 215 version, and never mix them. Besides, keep any change within 3% of the original diameter, match the load index, and set the pressure from the door placard. That is all it takes to get the Brezza tyre size right.
Check your vehicle's own label or manual. DailyPress is independent and not affiliated with any maker, tyre brand or government body.